SETUP & USAGE GUIDE
First-Time Setup Instructions for the Basecamp
Installing the support rods into the Basecamp is simple and straightforward:
1. Open the Basecamp by unzipping the Basecamp section. Locate the designated slots for the support rods.
2. Insert the Foldable Support Rods into the side slots, with the shorter end first. Then push the back ends of the Support Rods into the locking slots to secure them in place.
3. Once both rods are securely installed, set up the bed, and ensure the bed is stable before use.
4. To fold the Basecamp, you can either:
a. Remove the Support Rods from the installation slots on both sides of the bag, and place the rods into the storage bag.
b. Release the Back Ends of the Support Rods from the locking slots, then, while holding the Center Lock of the support rods with one hand, pull the Back Ends to fold the rods. Make sure the fold occurs between the back end and the center lock.
When the rods are folded correctly, the fold should land in the center of the daybed on both sides, directly aligned with the Support Arch installation slots.
The support rods do not need to be removed from the slots; simply fold them into an 'X' shape and fold the basecamp with the rods in place.
5. Fold the daybed neatly and pull both ends of the diaper bag together.
6. Locate the zipper slider and press it firmly against the zipper base. Insert the zipper head fully into the base, then close the zipper.
🛡️ Safety & Usage
RoamRest™ Diaper Bag is designed as a portable changing station and supervised lay-down space for infants.
- NEVER leave a child unattended.
- DO NOT use as an overnight sleeping device.
- ALWAYS place on a flat, stable surface.
- NEVER place on elevated surfaces (tables, countertops, beds, etc.).
- ALWAYS supervise your child while in use.
- NEVER carry the bag with a child inside.